
Adjunct Professor Gerard Ledwich
Science and Engineering Faculty,School of Electrical Engineering & Robotics
Personal details
- Name
- Adjunct Professor Gerard Ledwich
- Position(s)
- Adjunct Professor
Science and Engineering Faculty,
School of Electrical Engineering & Robotics - Discipline *
- Electrical and Electronic Engineering
- Phone
- +61 7 3138 2864
- g.ledwich@qut.edu.au
- Location
- View location details (QUT staff and student access only)
- Identifiers and profiles
-
- Qualifications
-
PhD (University of Newcastle), BEng(Hons) (University of Queensland)
- Professional memberships
and associations - Energy Theme Leader of Institute for Future Environments
- Fellow Engineers Australia
- Senior Member IEEE,
- Member IET,
- Fellow Inst of Asset Mgmt,
- RPEQ (Registered Professional Engineer Qld)
- Keywords
-
Electricity industry, interstate electricity links, power electronics, renewable energy, distribution planning
Biography
Areas of expertise
- Electricity industry
- Renewable energy
- Power electronics
- Interstate electricity links.
Role Prof Ledwich has been at QUT since 1999 and is currently Discipline leader for Power Engineering as well as Theme Leader in the Institute for Future Environments. The Power Engineering Discipline covers the fields of power system with studies in risk managed distribution planning , wide area controls for transmission and in demand management and this is a strong focus for Prof Ledwich’s research. The power electronics area of his research covers the control of microgrids, power hardware in the loop. The other aspect of his power engineering research is in the equipment area where there is research on the on-line condition monitoring of oil-paper insulation. The power engineering group led by Prof Ledwich is a leading winner of ARC funds nationally and has established good relations with many industries nationally and other universities worldwide.
Teaching
My teaching experience has covered
- power systems ,
- control,
- power electronics magnetics and machines
Experience
My experience with industry has included
- 6 months with Queensland Electricity commission on balancing for rail loads in central Queensland and
- 4 months with Energex on fault analysis and investment risk planning.
- There was a 2 month period in CEPEL, Brazil working on power system controls.
- Experience in the university sector has covered QUT, UQ, Uni of Newcastle, Uni of Calgary, Uni of Auckland , Uni of Wisconsin.
Most of the current projects are directly linked with Industry or aligned with their interests
Publications
- Liu Z, Wen F, Ledwich G, (2011) Optimal siting and sizing of distributed generators in distribution systems considering uncertainties, IEEE Transactions on Power Delivery p2541-2551
- Majumder R, Ledwich G, Ghosh A, Chakrabarti S, Zare F, (2010) Droop control of converter-interfaced microsources in rural distributed generation, IEEE Transactions on Power Delivery p2768-2778
- Bevrani H, Ghosh A, Ledwich G, (2010) Renewable energy sources and frequency regulation: survey and new perspectives, IET Renewable Power Generation p438-457
- Majumder R, Ghosh A, Ledwich G, Zare F, (2009) Load sharing and power quality enhanced operation of a distributed microgrid, IET Renewable Power Generation p109-119
- Kashem M, Ledwich G, (2004) Distributed Generation as Voltage Support for Single Wire Earth Return Systems, IEEE Transactions on Power Delivery p1002-1012
- Ghosh A, Ledwich G, (2003) Load Compensating DSTATCOM in Weak AC Systems, IEEE Transactions on Power Delivery p1302-1309
- Zare F, Ledwich G, (2002) A Hysteresis Current Control for Single-Phase Multilevel Voltage Source Inverters: PLD Implementation, IEEE Transactions on Power Electronics p731-738
- Ghosh A, Ledwich G, (2002) Compensation of Distribution System Voltage using DVR, IEEE Transactions on Power Delivery p1030-1036
- Ghosh A, Ledwich G, (2001) A Unified Power Quality Conditioner (UPQC) for Simultaneous Voltage and Current Compensation, Electric Power Systems Research p55-63
- Zare F, Ledwich G, (2002) Reduced Layer Planar Busbar for Voltage Source Inverters, IEEE Transactions on Power Electronics p508-516
For more publications by this staff member, visit QUT ePrints, the University's research repository.
Research projects
Grants and projects (Category 1: Australian Competitive Grants only)
- Title
- Customer Responsive Risk-Managed Network Planning
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- LP140100923
- Start year
- 2015
- Keywords
- Electricity; Planning Optimization; Social Response
- Title
- Increased power transfer capacity through Static Var Compensator (SVC) control
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- LP120100302
- Start year
- 2012
- Keywords
- Electric Power; Angle Measurement; Nonlinear Control; Static Var Compensator
- Title
- Robust electricity networks accommodating high levels of renewables
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- DP120101345
- Start year
- 2012
- Keywords
- Wind; Stability; Electric Energy; Demand Management
- Title
- Electricity Demand Side Management: Models, Optimisation and Customer Engagement
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- LP110201139
- Start year
- 2011
- Keywords
- Electricity; Demand Management; Prediction; Control; Customer Engagement
- Title
- Operation Control and Energy Management of Grid Connected DG Based on a Micro Grid - Project 7 (Theme -Low Emissions Distributed Energy)
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- Start year
- 2008
- Keywords
- Title
- Optimal Siting and Dispatch of Distributed Generators - Project 3 (Theme - Low Emissions Distributed Energy)
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- Start year
- 2008
- Keywords
- Title
- Development of Reliability Driven Rural Electricity Supply
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- LP0776898
- Start year
- 2007
- Keywords
- Electric Power Distribution; Rural Power Supply; Relaibility; Distributed Generation; Energy Management
- Title
- Advanced Planning Tools for the Prevention of System-Wide Blackouts of Large Power Systems
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- DP0665997
- Start year
- 2006
- Keywords
- Power System Security; Power Blackout; Electricity Market Security; Power System Dynamics; Power System Stability; Voltage Stability
- Title
- Emergency Control for Power System Separation
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- DP0559461
- Start year
- 2005
- Keywords
- power system control emergency control excitation systems load models
- Title
- Reducing Blackout Risk through Live Modelling and Monitoring
- Primary fund type
- CAT 1 - Australian Competitive Grant
- Project ID
- LP0455560
- Start year
- 2005
- Keywords
- power system oscillations; load modelling; controller validation; oscillation damping;
Supervision
Completed supervisions (Doctorate)
- Characterisation of the Cascode Gate Drive of Power MOSFETs in Clamped Inductive Switching Applications (2015)
- Enhancements to Dielectric Response Measurements of Oil-paper Insulation for Online and Offline Applications (2015)
- Probabilistic Power System Contingency Analysis Considering Wind (2015)
- Stability Analysis and Implementation of Power-Hardware- in-the-Loop for Power System Testing (2015)
- Wide Area Control through Aggregation of Power Systems (2013)
- Planning of Distribution Networks for Medium Voltage and Low Voltage (2011)
- Protection of distributed generation interfaced networks (2010)
- Analysis of Disturbances in Large Interconnected Power Systems (2007)
- On-Line Local Load Measurement Based Voltage Instability Prediction (2005)
- Proximity-to-separation Based Energy Function Control Strategy for Power System Stability (2004)